PIC16F676-I/P - 8 Bit Microcontroller, Flash, PIC16F, 20 MHz, 1.75 KB, 64 Byte, 14 Pins, DIP

PIC16F676-I/P - 8 Bit Microcontroller, Flash, PIC16F, 20 MHz, 1.75 KB, 64 Byte, 14 Pins, DIP

Integrated Circuits (ICs) > Embedded - Microcontrollers > Microchip Technology PIC16F676-I/P

Product Details

( Original and New ) PIC16F676-I/P Integrated Circuits (ICs)  Microcontroller IC

All integrated circuit and electronic component from the largest independent distributor of China    


 Contact person : Joyce Zhan   skype : ascosales1   QQ:2293059932
 e-mail:sales6 at hkasco.com  Cell phone :13533755541 


Product Description


Part StatusActive
Core ProcessorPIC
Core Size8-Bit
PeripheralsBrown-out Detect/Reset, POR, WDT
Number of I/O12
Program Memory Size1.75KB (1K x 14)
Program Memory TypeFLASH
EEPROM Size128 x 8
RAM Size64 x 8
Voltage - Supply (Vcc/Vdd)2 V ~ 5.5 V
Data ConvertersA/D 8x10b
Oscillator TypeInternal
Operating Temperature-40°C ~ 85°C (TA)
Package / Case14-DIP (0.300", 7.62mm)




Product Overview

The PIC16F676-I/P is a 8-bit Flash-based CMOS Microcontroller features 1 comparator and 128 bytes of EEPROM data memory. The PIC16F676 has a watchdog timer that is controlled by configuration bits. It runs off its own RC oscillator for added reliability. There are two timers that offer necessary delays on power-up. One is the Oscillator Start-up Timer (OST), intended to keep the chip in reset until the crystal oscillator is stable. The other is the Power-up Timer (PWRT), which provides a fixed delay of 72ms (nominal) on power-up only, designed to keep the part in Reset while the power supply stabilizes. There is also circuitry to reset the device if a brown-out occurs, which can provide at least a 72ms reset. With these three functions on-chip, most applications need no external Reset circuitry.

  • Programmable pull-up resistors

  • MPLAB® ICD-2 programming support or debugging support with optional header adapter

  • 8 Oscillator selections including 4MHz RC oscillator with programmable calibration, power-on reset

  • Power-saving sleep mode

  • Interrupt-on-pin change

  • Individual programmable weak pull-ups

  • Programmable code protection

  • High endurance flash/EEPROM cell


Automotive, Industrial, Consumer Electronics


ESD sensitive device, take proper precaution while handling the device.