All integrated circuit and electronic components from the largest independent distributor of China
Contact person : Apple Lin
Skype : mikehkasco
Mobile phone / hatsapp:008615876852151 E-mail:mike at hkasco.com
Product Description
General Description
The MIC2505, MIC2505-1, MIC2505-2, and MIC2506 are single and dual integrated high-side power switches that consist of TTL compatible control/enable inputs, a charge pump, and protected N-channel MOSFETs. The MIC2505/6 family can be used instead of separate high-side drivers and MOSFETs in many low-voltage applications. The MIC2505/6 family controls voltages ranging from 2.7V to 7.5V. The MIC2505-series can deliver at least 2A continuous current while the MIC2506 can deliver at least 1A continuous current from each output. A slow turn-on feature prevents high inrush current when switching capacitive loads. The internal control circuitry is powered from the same 2.7V to 7.5V. Within the device’s input range, outputs can be forced higher than the input voltage when disabled. Multipurpose open-drain fault flag outputs indicate overcurrent limiting, open-load detection (except MIC2505-1 and -2 versions), thermal shutdown, or undervoltage lockout for each channel. Overcurrent limiting is internally fixed and requires no external components. Open-load detection is active when the switch is off. When off, a normal load pulls the output pin low. If the load is open, an optional, external, high-value resistor pulls the output pin high, triggering the fault flag. MIC2505-1 and -2 versions are tailored to Universal Serial Bus (USB) applications and do not include open-load detection. Thermal shutdown turns off the output if the die temperature exceeds approximately 135°C. If enabled, the switch automatically restarts when the temperature falls 10°C. Undervoltage lockout (UVLO) shuts off the output if the supply drops below 2.3V typical and reenables the output when the supply exceeds 2.5V typical.
Applications
USB Power Distribution
3.3V and 5V power management
PC Card card inrush limiting switch
Hot plug-in power supplies
Battery-charger circuits
Part Status
Active
Switch Type
USB Switch
Number of Outputs
1
Ratio - Input:Output
1:1
Output Configuration
High Side
Output Type
N-Channel
Interface
On/Off
Voltage - Load
2.7 V ~ 7.5 V
Voltage - Supply (Vcc/Vdd)
Not Required
Current - Output (Max)
2A
Rds On (Typ)
30 mOhm
Input Type
Non-Inverting
Features
Slew Rate Controlled, Status Flag
Fault Protection
Current Limiting (Fixed), Over Temperature, UVLO
Operating Temperature
-40°C ~ 85°C (TA)
Package / Case
8-SOIC (0.154", 3.90mm Width)
Supplier Device Package
8-SOIC
Ordering Information
Certifications
Packing & Delivery
1.We will arrange the shipment within 3 working days after the payment reached.
2.We can ship Via your shipping account ( DHL / FedEx / UPS / TNT ), Or ship via our side .
3.We are not responsible for any accidents, delays or other issues that are the responsibility of the shipping service.
Warranty
Refund & Replacement
1.We provide 30-60 days warranty.
2.If the item you purchase from our store are not of perfected quality, that is they don't work electronically to manufacturers specifications, simply return them to us for replacement or refund.
3.If the items is defective, pls notify us within 3 days of delivery.
4.Any items must be returned in their original condition to qualify for a refund or replacement.
5.The buyer is responsible for all the shipping cost incurre
Feedback
FAQ
1. Q: What is your products quality ?
A: We offer all parts are new and original .
2. Q:What is your lead time?
A: 1-2 days. we have own warehouse and stock in large quantity.
3. Q: What is the shipping port?
A: We ship the goods via Port of HONGKONG or Shenzhen
4. Q: What is your payment terms?
A: T/T, Paypal, Western union, L/C ,ESROW
5.Q: What’s your advantage?
A: Competitive price & Good quality control & Fast production and delivery & Low MOQ & Professional sales and good after-sale service
